PRODUCT DESCRIPTION VpCI-389 provides excellent protection in outsideapplications as
well as offering excellent salt sprayresistance. This product is an
environmentally friendly replacement for products such as other
oil-based products. VpCI-389 is dilutable. Most working ranges are between 1:3 to 1:8
(VpCI -389:Water). The recommended film thickness range is 0.2-2.0 mils (5-50 microns). As
a soft film, VCI-389 is an excellent choice for long-term indoor
protection (up to 5 years*) and short to medium-term (6-24 months*)
unsheltered outdoor protection. The product cures to a soft film
and eventually hardens. VpCI -389 can be easily removed with
alkaline cleaners such as Cortec VpCI -414. *Depends on conditions and/or film thickness FEATURES Excellent outdoor protection Multimetal protection Safe and easy to use Environmentally friendly METALS PROTECTED Aluminum Steels Cast iron Copper and alloys Tin TYPICAL APPLICATIONS Equipment lay-up Parts processing protection Overseas shipping Maintenance repairs Parts storage PROPERTIES Appearance Off-white to beige viscous liquid Dry to Recoat Time 30-90 minutes Dry to Tacky Time 10-60 minutes Dry to Cure Time 1-3 hours Film Type Soft, tacky Non-volatile Content 35-43% Shelf Life 12 months at 75F (24C) Theoretical Coverage 530-690 ft 2 /gal at 1-mil(14-17 m 2 /l at 25
microns) VOC 1.42 lb/gal (170 g/l) Density 7.9-8.4 lb/gal (0.95-1.01 kg/l) pH 9.5-10.5 (Neat) APPLICATION Surface Preparation: The surface must be equivalent to ARS. Low A-3 andhigher or SSPCs
SPs 1, 2, 3, 5, 6 and 10. Product Preparation: Can be diluted with water for sprayability/applicationpurposes. Product Application: Mix VCI-389 prior to use. VCI-389 can be applied by spray, brush,
roll or dip. Normal WFT of 5-mils (125 microns) yields 2-mils (50
microns) DFT. Airless Spray: Pressure 2000 psi (140 bar) Filter 60 mesh Tip 0.015” (0.038 cm) Dilution 0-50% Conventional: Equipment Binks 18 gun or equivalent Automatization pressure 40 psi (3 bar) Fluid pressure 20 psi (1 bar) Cap/Tip 66/S Dilution 10-50% | 
